Type 

Roll-based cutting plotter ⁧⁧

Maximum Media Width 

CG-60AR: 29.1″ (740 mm)
CG-130AR: 61″ (1550 mm)

Cutting Width

CG-60AR: 23.9″ (600 mm)
CG-130AR: 53.9″ (1370 mm)

Maximum media thickness

Recommended sheets up to 0.01″ (.25mm) including laminate and liner; Up to 0.04″ (1mm) max (results may vary)

Maximum Cut Speed

28.7″/s (73 cm/s)

Moving speed second

40.5″/s (103 cm/s )

Maximum Cut pressure (Metric grams)

550g

Adjustable speed range

1-10cm/s: 1cm/s step adjustment
1-73cm/s: 5cm/s step adjustment

Cutter Types

Eccentric cutter, Blade for small character, Blade for reflective sheet, Blade for fluorescent sheet, Blade for PVC with low-pressure, Ballpoint pen, Cutter heavy paper, Creasing Tool

Mechanical resolution

X direction: 2.5 μm; Y direction 5 μm

Program steps

25 μm or 10 μm (MGL-IIc); 100 μm, 50 μm (MGL-Ic1)

Repeatability

+/- 0.2 mm / 2 M

Downforce pressure 

Cutter: 10-20g (2g step), 20-100g (5g step), 100-550g (10g step)
Pen: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)

Command

MGL-IIc, MGL-Ic1

Interface

USB, RS-232C, Ethernet

Receive buffer

27MB standard, 17MB when sorting

Power supply

AC 100 V – 240 V 1A 50/60Hz

Power consumption

168W or less | 228W or less | 228W or less

Operational Environment

Temperature: 5 – 35 degC (41 – 95 degF),
Humidity: 35 – 75 ％ Rh (Non-condensing)

Dimensions (W × D × H)

CG-60AR: 1,030 mm x 287 mm x 335 mm (40.6 in x 11.3 in x 13.2 in)

CG-130AR: 1,830 mm x 580 mm x 1,150 mm (72.0 in x 22.8 in x 45.3 in)

Weight

CG-60AR: 37.5 lbs. (17 kg)
CG-130AR: 94.8 lbs. (43 kg)