The Konica Minolta KM1024 MN printhead is a robust, shear mode, piezo on-demand printhead that is usable in both binary and 8 level grayscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of grayscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN printhead has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This printhead is also known as the Konica Minolta KM 1024 MNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.

Specifications :

Technology                 : On-Demand Piezo Electric (Shared Wall 3 Cycle)

Native Resolution         : 360 dpi

Cal. Droplet Size                 : 14 pico litre

Max. Drops in Greyscale : 8 drops

Tot. Amount of Nozzles : 1024 (512 nozzles per line)

Nozzle Spacing         : 70.5 microns

Print Width                 : 72 mm

Firing Frequency                 : 12.8 kHz

Ink Compatibility                 : Oil Based and Solvent Inks

Heater                 : Not integrated

Compatible With :

Agfa

Anapurna M1600

Anapurna M²

Anapurna M2050

Anapurna M2540 FB

Allwin

C8

DGI

VE-3206

Dilli

Neo Titan FB2513-06DW

Neo Titan UVT-1604D